Dear Mr. Grinch - Santa Tray UVDTF Decal

1. Make sure your Wood Board (or any other surface/material) is clean from any hand oils and it's DRY. (We recommend using 91% Isopropyl Alcohol to clean)

2. Before removing transparent backing squeegee wrap front and back to ensure the entire design transfers to the clear film.

3. Then, peel the transfer off of transparent backing, starting from one end.

4. Place the adhesive decal onto the wood board or surface to your taste. PLEASE REMEMBER The adhesive is extremely strong. That means once the transfer touches the board its almost impossible to take off.

5. Once transfer is placed, use a squeegee over the entire transfer to push any air bubbles out.

6. Rub the design few times to ensure everything is adhere correctly.

7. Slowly peel the clear film off and you're done! 

UV-DTF Decal Transfer can be used on:

Wood, Glass, Metal, Plastic, Ceramic or any hard surface. 

We ONLY recommend Hand washing. Do not soak in water. Do not wipe with harsh chemicals. We DO NOT recommend dishwasher or microwave.

We are NOT responsible for UV Decals that are applied incorrectly or damaged during application.

Please note that not all brands of Cutting Boards have the exact same size measurements. They differ by a couple of millimeters.

Measure your board and adjusted/trim if may be necessary*

Also, note that colors will vary compared to this image mockup due to screen monitor.

All UV-DTF Decals Transfers are FINAL SALE!

We do not accept returns or exchanges for any of our products. We are not responsible for any transfers that are applied incorrectly.

Make sure you are following application instructions.

@gcctransfers

Follow us on TikTok

@gcctransfers