UVDTF Transfer Application Instructions

1. Make sure your glass cup/plastic (or any other surface/material) is clean from any hand oils and it's DRY. (We recommend using 91% Isopropyl Alcohol to clean)

2. Before removing white backing squeegee wrap front and back to ensure the entire design transfers to the clear film.

3. Then, peel the transfer off of white backing, starting from one end.

4. Place the adhesive wrap onto the cup or surface to your taste. PLEASE REMEMBER The adhesive is extremely strong. That means once the transfer touches the glass its almost impossible to take off.

5. Once transfer is placed, use a squeegee over the entire transfer to push any air bubbles out.

6. Rub the design few times to ensure everything is adhere correctly.

7. Slowly peel the clear film off and you're done!